High Quality Pneumatic Power Valve, Working Medium for Air, Uses in Professional Industrial Equipment Suppliers in China

Home > Products > Pipe Wrap Tape > 1'' ASCO Submerged Air Control Pulse Valve

1'' ASCO Submerged Air Control Pulse Valve

  • 1'' ASCO Submerged Air Control Pulse Valve
  • 1'' ASCO Submerged Air Control Pulse Valve
  • 1'' ASCO Submerged Air Control Pulse Valve
  • 1'' ASCO Submerged Air Control Pulse Valve

1'' ASCO Submerged Air Control Pulse Valve

    Payment Type: L/C,T/T,Paypal,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW,FCA,CPT,CIP
    Min. Order: 1 Piece/Pieces
    Delivery Time: 7 Days
    Packaging: boxes,cartons,pallets
    Productivity: 100000pcs per month
    Brand: OEM
    Transportation: Ocean,Land,Air
    Place of Origin: Ningbo,China
    Supply Ability: 100000pcs per month
    Certificate: CE.ISO
    Port: Ningbo,Shanghai,Tianjing

Basic Info

Model No.: QK25

Product Description

1'' ASCO Submerged Air Control Pulse Valve

Before installation, the air supply pipe should be ventilated. Pay attention to the gas flow direction and the correct connection (the arrow on the valve body should be consistent with the flow direction of the medium); unless otherwise specified, the valve can be installed at any position. , however, for optimal use Energy and life, the solenoid valve should be installed vertically to avoid foreign matter accumulating in the solenoid valve spool assembly. In order to ensure the normal use of the electromagnetic pulse valve, please install the oil-water separator in front of the electromagnetic pulse valve. Explosion-proof solenoid valves should be used in a hazardous environment to prevent accidents such as explosions caused by electric sparks.

Depending on the medium and operating conditions, we recommend that you regularly check the internal parts of the valve for damage, or excessive wear, thoroughly clean all parts (all valves should be cleaned regularly, the cleaning interval varies according to the medium and operating conditions, generally In this case, if the voltage applied to the coil is correct, then running hysteresis, noise, or excessive leakage means cleaning is required. In extreme cases, valve operation may occur, or the valve may not open and close. When cleaning the valve, Should clean the filter or filter at the same time)

Model No. QK25
Working Pressure 0.3-0.8mpa`
Environment Temperature -5~55℃
Relative Humidity <85%
Working Medium Clean Air
Voltage AC110 AC220 DC24V
Diaphragm Usage Injection more than 1 million
Application For Industrial Dust Collector
Package At your request

About the Diaphragm,we provide the detailed datas

Pulse Valve Diaphragm Data of Pulse Valve Diaphragm

You know,Pneumatic Pulse Valve final used in Dust Filter System and plays the important role in it

Dust Filter System

When you use it

1. If some valves leak and the diaphragm is not open, please check if there are any impurities on the diaphragm. Clean the diaphragm to check whether the diaphragm is intact.

2. If the coil is burnt out, it may be the lead damage, the moving iron core is stuck, and it is caused by long-term energization. Please check the moving iron core plug and other timely replacement parts to check the working condition of the control system.

3. If there is voltage but the valve does not work, there may be damage to the diaphragm or blockage of the orifice, and replacement of the fitting in time.

4. If the ambient temperature is below -10 C°, the valve is leaking or unable to open. Check if there is ice in the valve due to low ambient temperature. Please pay attention to heat preservation.

Installation and use:

1. After unpacking, pay attention to check whether each component is damaged during transportation. Check that the model, pressure, voltage, frequency and application on the nameplate are correct. The electromagnetic pulse valve cannot be used with incompatible liquids or under conditions that exceed its rated pressure. The installation and maintenance of the electromagnetic pulse valve must be carried out by qualified personnel.

2. All O-rings should be coated with suitable lubricant during installation; connect the valve piping system according to the marking on the valve body, just wrap the appropriate amount of sealed raw tape on the external thread of the pipe. If raw meal is used on the internal thread of the electromagnetic pulse valve, the raw meal may enter and cause operational difficulties. Pipe deformation is avoided by proper support and piping; when tightening the pipe, do not use the valve as a lever. The position of the wrench on the valve body or pipe should be as close as possible to the joint. To protect the electromagnetic pulse valve, install a suitable filter or filter as close as possible to the inlet side of the valve and clean it periodically according to operating conditions.

If you are interesting,pls contact us without any hesitation



Ningbo Brando Hardware Co LtdBrando is a professional manufacturer and designer of solenoid valve, solenoid coil and solenoid valve armature assembly, located in Ningbo, China. Our main products include armature assembly, solenoid coil, brass solenoid valve, stainless steel solenoid valve, plastic solenoid valve, pneumatic solenoid valve, pulse jet valve, diaphragm repair kit, pulse controller, injector rail and can serve customers from various industries. Our company has been producing for more than 10 years, and cooperates with different customers such as oil & gas, chemical industry, water treatment, food & beverage, medical system and so on.

Brando maintains its high position in the industrial manufacturing. The advanced lathes and milling machinery are introduced, and from materials procurement to finished product and assembly, it is fully automated and controlled by computers, to improve product quality, and to continuously increase production and delivery efficiency.

Brando has fully adopted the ISO-9001 quality management system and introduced the most advanced precision equipment for product inspection, such as digital pressure gauges, computer applications, air leak testers, pressure testers and flow testers.

banner 2

Main Services:
1. Customized Design and Production: Brando can design and manufacture customized solenoid valves, solenoid coils and solenoid valve armature components to meet your specific needs and applications. We can provide services from small air treatment devices to large fluid systems.

2. Quality Assurance: In addition to designing and manufacturing high-quality products, Brando also provides 100% testing services for all components to ensure that they achieve the best performance under the best performance and to ensure that it runs well in your project.

3. Delivery and After-sales Service: Brando provides large inventory and on-time delivery within 5 to 10 days. We also provide unparalleled after-sales service and 1 year warranty for all products.

Product range:

1. Solenoid Coil
2. Solenoid Armature/Stem
3. 5/2, 5/3, 3/2, 2/2 Way Pneumatic Valve
4. Refrigeration Solenoid Valve
5. Dust Collector Pulse Jet Valve
6. Diaphragm Repair Kit
7. Pulse Controller
8. Brass Solenoid Valve
9. Stainless Steel Solenoid Valve
10. Plastic Solenoid Valve
11. Injector Rail

Focus On Your Demands, Offer You Best Solution!

Company Info

  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters