Model No.: butyl tape
This series tape is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
INNER WRAP TAPE: XUNDA-T 100 Series
|Total thickness||0.51 mm||0.65 mm||0.80 mm|
|Polyethylene Film||0.31 mm||0.34 mm||0.39 mm|
|Synthetic Adhesive||0.20 mm||0.31 mm||0.41 mm|
|Elongation at Break||³ 400%|
|Tensile Strength||60 N/cm||61.2 N/cm||63 N/cm|
|Yield Strength||35.5 N/cm||42.3 N/cm||45.5 N/cm|
|Peel Adhesion to Primed Pipe||21.2 N/cm||26.5 N/cm||33.2 N/cm|
|Dielectric Strength||35 KV/mm||45.8 KV/mm||48 KV/mm|
|Cathodic Disbandment||0.24 in radius 6.4 mm|
|Volume Resistivity||2.5 x 1012 ohm.m|
|Water Vapor Transmission Rate||£ 0.1gm/M2/24h|
|Water Absorption Rate||< 0.06%|
|Recommended Application Temperature||-5 to +60ºC|
|Max Serve Temperature||-40 to + 80ºC|
|Available Roll Size (width x length)||2" to 9" X 50 to800 feet|
Pipeline pump several ways to determine the normal operation: 1, no abnormal noise during operation, run one hour motor is not hot (with experience). 2, look at the import and export pressure pump design point near the head of the operation (with a pressure gauge). 3, measuring motor operating current within the motor rated...
ISW Horizontal Pipeline Centrifugal Pump Structure: 1 Motor: Directly connected with the pump power transmission, the use of brand-name motor. 2 pump shaft: coaxial with the motor, for the motor shaft, to ensure that the concentric shaft, the pump running smoothly. No noise and vibration, using chrome-plated handle,...
I. Maintenance of hot-water pipeline pump 1. Operational maintenance: (1) Imported pipeline must be filled with liquid, forbidding long-term operation of hot-water pipeline pump in cavitation. (2) Regularly check the motor current 値, must not exceed the motor 颔 rated current. (3) After long-running hot-water pipeline pump,...
Pipeline centrifugal pump classification: Pipeline centrifugal pump main products are pipeline centrifugal pump, vertical hot water pump, vertical high temperature centrifugal pump, vertical pipeline pump, vertical stainless steel explosion-proof chemical centrifugal pump. Pipeline centrifugal pump applications: 1. Pipeline...
Product Categories : Butyl Tape