Basic Info
Model No.: T200
Product Description
Model NO.: T200 Anticorrosive Tape ,T200 Inner Tape: 0.5mm 0.635mm 0.76mm Thickness Specification: SGS DVGW EN23068 AWWA C209 C214 HS Code: 39191099 Material: HDPE Trademark: XUNDA Origin: Jining City, China Polyethylene Protective Tapes (T 200)
I Description
The T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine.
II Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
III Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
IVTechnical datas:
OUTER WRAP TAPE: XUNDA-T200 Series
Contact us if you need more details on Anticorrosion Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pipe Wrap Tape、Adhesive Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.
I Description
The T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine.
II Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
III Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
IVTechnical datas:
OUTER WRAP TAPE: XUNDA-T200 Series
| Type | T 250 | T 265 | T 280 |
| Total thickness | 0.51 mm | 0.65 mm | 0.80 mm |
| Film | 0.38 mm | 0.51 mm | 0.63 mm |
| Adhesive | 0.13 mm | 0.14 mm | 0.17 mm |
| Elongation at Break | ³ 400% | ||
| Tensile Strength | 45.3 N/cm | 50.8 N/cm | 60.1 N/cm |
| Yield Strength | 35.9 N/cm | 43.4 N/cm | 45.8 N/cm |
| Dielectric Breakdown | 32.9 KV/mm | 43.5 KV/mm | 45.2 KV/mm |
| Cathodic Disbandment | 0.24 in radius 6.4 mm | ||
| Volume Resistivity | 2.5 x 1012 ohm.m | ||
| Water Vapor Transmission Rate | £ 0.08 gm/M2/24h | ||
| Water Absorption Rate | < 0.07% | ||
| Recommended Application Temperature | -50 to +600 C | ||
| Color | White | ||
| Available Roll Size (width x length) | 2" to 9" X 50 to 600 feet | ||
Contact us if you need more details on Anticorrosion Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pipe Wrap Tape、Adhesive Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Anticorrosive Tape
Email to this supplier
